Common Mistakes Made When Making Lattice Fence Panels 

Making your own fence panels is a common DIY project for homeowners. You may be interested in this project to cover an unsightly property structure or to add more aesthetic value to your property. Whatever the reason for your interest in lattice fence paneling, it is essential that you pursue your project correctly for the best results. 

Even if you’ve done preliminary research on how to get started, it is important to take a deeper look into what is involved in a successful panel installation. Many factors play a role in this project, including the levelness of the installation region, as well as the weather conditions that exist in your area. Costs for materials should also be thoughtfully considered, not only for budgeting, but to understand what you’re truly getting out of your material choices. 

It is possible to install your own fencing successfully, but it is easy to overlook common mistakes that interfere with the outcomes of these projects. To help ensure your fence paneling project is a success, below is a list of ten common mistakes to avoid when making your lattice fence panels. Read on to learn how to achieve the best possible outcomes for your project. 

  1. Avoid Using Standard Vinyl Lattice Fence Panels 

When choosing lattice fence panels, select options that are thicker than standard vinyl lattice. You can create custom-sized panels made from scratch-resistant materials by choosing made-to-order options. Custom orders also allow you to choose colors that are not easily found in general department stores. 

By going with customizations, you can also select any additional weight and material options that fulfill the needs of your specific project. For example, if you are trying to hide the sight of your outdoor AC unit, you might choose lightweight lattice fence panels so that they may be easily removed if your unit becomes in need of maintenance or repair. Weather-resistant materials are also something to factor in as you create your custom order for such purposes.

  1. Avoid Uneven Postholes 

Another mistake to avoid is not setting your post-holes evenly apart from each other. Ensure that your post-holes are spaced evenly for the stability and balance of your fence panels, and to ensure the ease of removal as needed. 

  1. Don’t Forget Post Holders 

A common mistake of people making their own lattice fence panels is not knowing to include post-holders. Without these added supports, your post may have difficulty coming in and out without getting stuck. Before you’re ready to secure your post-holders, test them out to ensure they move in and out of the post-holes easily. 

  1. Do Not Use Cement Until Post Holders Are Secured 

To avoid knocking the postholder boxes out of place, screw in exterior screws on each side of the post-holders. The cement may gradually move the boxes out of alignment if this task is neglected. You don’t want this imbalance to become irreversible after the concrete cures everything in place.  

  1. Avoid “Eyeballing” Your Determined Post Height 
  • For the lattice fence panel frames, avoid determining your height for placement incorrectly. Establishing the post height is not something you can roughly estimate. You need a system to rely on to see how high up your post will sit, especially if you’re attempting to cover something up. 
  • To do so, measure a level line through the tallest point you want your fence to cover. From the top of the postholder to that line, indicate your mark. Then, use that line to measure up to the top of the post. 
  • Subtract the measurement you come up with by 1 inch. Use this remaining measurement as your guide to cut the bottom post.
  1. Do Not Install Panels Without Considering Removal 

When you’re ready to attach your front lattice fence panels, use a secure method to install and remove without hassle. To accomplish this, secure the frames with bolt latch sets and install them with screws. 

  1. Avoid Store-bought Channels To Prevent Poor Installation  

For the side lattice fence panels, custom-order or make your own channels that are cut to the size you need. Your side panels may require an uncommon angle, height, or width span not commonly available in store-bought channels. Ensure you keep your channels close enough together to allow for a snug fit once the panels slide in. 

  1. Don’t Overlook External Interferences 

Another mistake to avoid is choosing panel materials that conflict with other elements in the space. For example, if you plan to install your panels in your backyard and you have ivy growing in your chosen spot, avoid installing panels with crosshatch patterns. Your ivy may spread onto the panels, which may not be something you want. It is crucial to consider the general space you’ll be working with and rule out any potential conflicts with the placement of your lattice fence panels. 

  1. Avoid Choosing Plastic Over Wood  

Although efforts to maintain a sustainable environment are honorable, when creating your lattice fence panels, choosing plastic rather than wood is problematic. Not only will the plastic lattice appear very shiny in the sunlight, but it will not be nearly as resistant to harsh weather conditions as pressure-treated wood. If plastic lattice is your only option, consider painting it to reduce the shine and to make it more weather resistant. 

10. Don’t Align Your Slats The Wrong Way 

Do not make the mistake of constructing your lattice fence panels with the incorrect orientation of slats. Specifically, if you are making a square lattice, the horizontal slats must be placed behind the vertical slats. In most cases, your fencing will follow an upward direction; you’ll need the vertical slats stationed in front to accomplish this effectively. 

Choose Your Options Wisely For The Best Outcomes 

To achieve the best results with your fence paneling, pay attention to the choices you make for your project’s construction and for your material and design choices. All of these factors will influence the look and functionality of your lattice fence panels, so it is vital to choose your options wisely!

blank
/* */